9.5. Removal and installation of a support of the disk brake mechanism


  1. Car front also establish to Poddomkratta it on props (see the illustration Scheme of an Institution of Props for fixing of the car in the lifted situation). Remove the corresponding forward wheel.
  2. Disconnect from a support the brake line — at once to a zakuporta the open end of the line for the purpose of minimization of losses of brake fluid, and also in order to avoid hit in system of dirt.
  3. Turn out fixing bolts (see the illustration Design of Disk Brake Mechanisms of Forward Wheels) and remove a support.
  4. Installation is made upside-down — track that all fixture was tightened with the required effort.
  5. In conclusion pump over the brake system (see Pumping of the brake system).