- Remove the driveshaft (see Removal and installation of driveshafts).
- By means of a special key (J34311) give a nut of the leading gear wheel.
- By means of a suitable stripper remove a connecting flange.
- Having hooked, take an epiploon from a landing nest.
- By means of a cylindrical mandrel (KV38102510) put a new epiploon.
|
As a mandrel the replaceable face head of the corresponding size, or a piece of a pipe of suitable diameter will approach. |
- Further installation is made as it should be, the return to an order of dismantle of components, - track that all fixture was tightened with the required effort.
|
|