8.2.6. Replacement of an epiploon of a rod of switching of the transfer case


  1. Remove the forward driveshaft.
  2. Remove a connecting flange (see Replacement of an epiploon of lengthening of transmission).
  1. Disconnect a control lever from the executive lever of the drive of switching, then remove the executive lever.
  1. Having hooked the suitable screw-driver, remove a switching rod epiploon.
  1. Previously having greased sealing sponges with universal lubricant, fill a new epiploon in a landing nest and press it by means of a cylindrical mandrel as which it is possible to use the replaceable face head suitable by the size or a piece of a pipe of the corresponding diameter. The edge of a mandrel has to rest only against a rigid face surface of an epiploon.
  1. Further installation is made as it should be, the return to an order of dismantle of components.