8.1.8. Removal, check of a state and installation of a driving cable of blocking of switchings


Details of installation of a driving cable of blocking of switching

 

 PERFORMANCE ORDER

  1. Release the ram from the holder of the regulator and disconnect a cable from a driving rod.
  1. Connect a cable to the lock of blocking of a steering column.
  1. Latch a cable in clamps and by means of a collar connect to the operating cable.
  2. Transfer the selector lever to situation "P".
  1. Fill a driving rod in the holder of the regulator.
  1. Record a cable casing cover in a basic arm.
  2. By means of the ram record the holder of the regulator on a rod.