4.11. Replacement of a back epiploon of a bent shaft


Removal and installation of a back epiploon of a bent shaft

 

 PERFORMANCE ORDER

  1. Remove transmission and a driving disk (see the Head the Transmission line).
  2. Having hooked, the suitable tool, take an epiploon from the landing nest in the holder — try not to damage sealing walls of a nest and a pin of a bent shaft.
  3. Before installation oil sponges of a new epiploon pure motive.
  4. Fill an epiploon in the landing nest and by means of a suitable mandrel press it aflush with an external surface of the holder.

As a mandrel the replaceable face head of the corresponding size, or a piece of a pipe of suitable diameter can be used — the mandrel has to rest only against a rigid face surface of an epiploon!

  1. Installation of other components is made as it should be, the return to an order of their dismantle — track that all fixture was tightened with the required effort.