10:24. Removal and installation of reduktorny assembly

Cm. illustration Design of Reduktorny Assembly .


Removal

 PERFORMANCE ORDER

  1. The car also establish to Poddomkratta it on props (see the illustration Scheme of an Institution of Props for fixing of the car in the lifted situation). Bring forward wheels into rectilinear situation — rectilinear situation is identified on tags on a back cover and a case of the steering mechanism.
  1. Disconnect the top and lower cardan hinges from a case of reduktorny assembly of the steering mechanism. Remove reduktorny assembly. In case of need remove the lower hinge, having disconnected it from a shaft of the leading gear wheel of rack transfer.


Installation

 PERFORMANCE ORDER

  1. Make sure that forward wheels of the car still are in rectilinear situation.
  2. Establish reduktorny assembly on the regular place.
  1. Connect the lower cardan hinge to a shaft of the leading gear wheel of rack transfer, having tracked correctness of combination of identification tags on a back cover of a case.
  1. Watching that tags were not displaced, screw and tighten a fixing bolt.
  1. At connection of the top and lower cardan hinges to track correctness of their arrangement.