10.1. Specifications
|
Separate parameters are specified also in the text of the Head and in case of obligation of their performance are highlighted in bold type. |
Characteristic |
Value |
Type | |
|
Completely independent, with McPherson's racks, the stabilizer of cross stability |
|
Zhyostky Bridge, jet bar and four levers, stabilizer of cross stability |
|
The hydrostrengthened rack transfer, two cross steering drafts |
GUR system liquid type |
Dexron II, IIE, III |
Volume of hydraulic liquid, l |
0.9 |
Height of a road gleam (cm. illustration Assessment of a Condition of Screw Springs), mm | |
| |
|
815 |
|
855 |
| |
|
815 |
|
846 |
Forward suspension bracket
Spherical support
Cm. illustration Assessment of a Side Play of Landing of a Wheel.
Characteristic |
Value |
Extreme admissible size of an axial side play, mm |
0.0 |
Resistance to a side deviation of a shaft of a spherical finger, kgf |
0.8 — 7.8 |
Torque of axial rotation of a shaft of a spherical finger, Nanometer |
0.5 — 5.0 |
Wheel bearings
Characteristic |
Value |
Size of a pretightness, kgf |
0.7 — 2.1 |
Steering
Adjustment of a tension of a belt of the drive of the steering pump
Characteristic |
Value |
Belt deflection size at effort of 10 kgfs, mm | |
|
8.9 — 9.9 |
|
10.9 — 13.0 |
Steering drive
See Check of a condition of steering drafts.
Characteristic |
Value |
Dimensional characteristics, mm | |
|
200.0 |
|
240.0 |
| |
|
0.3 |
|
0.1 |
Torque of axial rotation of a spherical finger of an external tip (V), Nanometer |
0.3 — 2.9 |
Resistance to side deviations (A), kgf | |
|
0.39 — 3.24 |
|
0.49 — 4.71 |
Rack steering mechanism
Characteristic |
Value |
Effort of sliding of a lath *, kgf |
14 — 26 |
Course of a lath, mm |
72.1 |
Effort of a provorachivaniye of the leading gear wheel, Nanometer |
|
Average value |
0.8 — 1.5 |
The maximum difference of torque at a provorachivaniye from an emphasis against the stop |
0.6 |
|
* It is measured with a normal hydraulic pressure in a path of GUR at a pulling of steering draft from the neutral provision of a lath at a size of 11.11 mm from speed of 3.17 mm/page. |
System of hydrostrengthening
Characteristic |
Value |
Pressure in a hydraulic path, kgf/cm 2 |
88 — 94 |
Steering column
See Removal, check of a state and installation of a steering column.
Characteristic |
Value |
Geometrical characteristics, mm | |
|
700.3 — 704.3 |
|
178.0 — 180.0 |
|
430.8 — 432.8 |
Geometrical characteristics of the driving mechanism of adjustment of an inclination of a column, mm | |
|
21.0 |
|
9.0 |
Angles of installation of wheels
Characteristic |
Value |
Disorder, hail | |
|
- 0.58 — 0.92 |
Corner of a longitudinal inclination of an axis of turn of a wheel (выбег), hail | |
|
2.25 — 3.75 |
Convergence, hail | |
|
0.08 — 0.24 |
Convergence, mm | |
|
1.0 — 3.0 |
Divergence corner at turn of wheels on 20 °, a hail | |
| |
|
30 — 34 |
|
28 — 32 |
Corner of a cross inclination of an axis of turn of a wheel, hail | |
|
14:33 ± 0.75 |
Efforts of tightening of threaded connections, Nanometer
Connection type |
Value |
Nuts of fastening of wheels |
118 — 146 |
Forward suspension bracket
Connection type |
Value |
Bolts of fastening of supports of brake mechanisms to a rotary fist |
72 — 98 |
Bolts of fastening of naves of free rotation to stupichny assemblies |
24 — 34 |
Bolts of fastening of brake disks to stupichny assemblies |
49 — 69 |
Nuts of fastening of spherical support to rotary fists |
118 — 167 |
Bolts of fastening of spherical support to cross levers of a suspension bracket |
103 — 127 |
Bolts of fastening of basic arms of the stabilizer of cross stability |
62 — 88 |
Nuts of fastening of racks of the stabilizer of cross stability |
83 — 103 |
Nuts of piston rods of shock-absorbers |
58 — 79 |
Nuts of fastening of the top support of racks of a suspension bracket |
39 — 54 |
Nuts of bolts of fastening of the lower support of racks of a suspension bracket to rotary fists |
151 — 165 |
Buffers of the course of compression of racks |
21 — 26 |
Fastening nuts to rotary fists of tips of steering drafts |
64 — 108 |
Nuts of fastening of cross levers of a suspension bracket to a car body |
94 — 103 |
Back suspension bracket
Connection type |
Value |
Nuts of fastening of the lower levers |
140 — 157 |
Nuts of fastening of the top levers |
140 — 157 |
Bolts of fastening of the right end of a jet bar to an arm of the back bridge |
108 — 127 |
Bolts of fastening of the left end of a jet bar to a frame |
140 — 157 |
Bolts / nut of fastening of the lower support of shock-absorbers |
67 — 88 |
Nuts of fastening of the top support of shock-absorbers |
59 — 78 |
Bolts of collars / plugs of fastening shock-absorber hoses |
25 — 32 |
Bolts of fastening of racks of the stabilizer of cross resistance to a frame |
25 — 32 |
Nuts of fastening of racks of the stabilizer of cross resistance to an arm |
25 — 32 |
Nuts of fastening of racks of the stabilizer of cross resistance to a stabilizer bar |
41 — 47 |
Steering
Steering pump
Connection type |
Value |
Bolts of fastening of an arm |
14 — 18 |
Bolt of fastening of the operating valve |
69 — 78 |
Bolt of the nipple socket of a hydraulic hose |
36 — 51 |
Nut of fastening of a pulley |
54 — 68 |
Bolts of fastening of a back cover |
14 — 18 |
Bolt of fastening of the soaking-up tube |
14 — 18 |
Steering mechanism and drive
Connection type |
Value |
Lock-nut of the adjusting screw of the steering mechanism |
49 — 69 |
Fastening of a face cover of the steering mechanism |
58 — 73 |
Nipple sockets of hydraulic lines |
10 — 16 |
Bolt of fastening of the lower hinge to a shaft of the leading gear wheel |
24 — 29 |
Bolt of fastening of a back cover of a case |
20 — 19 |
Bolts of fastening of assembly of the steering mechanism |
118 — 137 |
Internal tips of steering drafts |
118 — 147 |
Lock-nuts of tips of steering drafts |
64 — 108 |
Cap nuts of nipple connections | |
|
30 — 25 |
|
30 — 35 |
Nuts of fastening of tips of steering thirsts for rotary fists |
64 — 69 |
Steering column
Connection type |
Value |
Bolts of fastening of the module of a safety cushion |
13 — 25 |
Bolt of the flexible hinge |
23 — 30 |
Bolt of the lower cardan U-shaped hinge |
23 — 30 |
Lock nut of a shaft of a steering column |
25 — 34 |
Nut of fastening of a steering wheel |
30 — 39 |
Bolts of the top basic arm |
12 — 18 |
Bolt of the top cardan U-shaped hinge |
23 — 30 |
Nuts of fastening of the panel of a floor / boot |
9 — 12 |